List Of Materials Required For The Production Of Disposable Medical Masks

- Apr 26, 2020-


I. SS non-woven fabric dark-outer layer 

  1. Material weight 25 grams / square

  2.  Material width 200MM

  3.  Each piece is cut to length 175MM

  4. Single piece weight 0.875G Remarks: green, blue, black, etc.


ii. White meltblown non-woven fabric-filter layer


1. Material weight 22 g / sq.


2.Material width 180MM


3. Each piece is cut to length 175MM


4. Single piece weight 0.693G


Remarks: The filtration index is 90%, 95%, 99.99%, the material can be selected according to the production requirements of the enterprise, and the width is 175MM



III, SS non-woven fabric light color or white-for inner layer


1. Material weight 25 grams / square


2. Material width 210MM


3. Each piece is cut to length 175MM


4.Single piece weight 0.91875G


Remarks: 20g is available, but the mask is generally soft


IV, nose bridge 

  1. Each piece is cut 100MM Remarks: Made of plastic or iron, it is recommended to use plastic with iron wire

     

Elastic ear straps 

  1. Each piece is cut 300MM Remarks: One side 150MM * 2 side = 300MM I hope this list of materials is useful for new equipment companies. At present, the epidemic situation of the new coronavirus is severe, and many enterprises have newly added mask equipment to increase production, and fight the war without smoke.